| Barrel
B-1 - Barrel for Chute (w/tiedowns)
$195
Choose color for barrel, nonskid surface, and tiedowns
Collapsed Tunnel is available either complete (Barrel
& Fabric sections) or individually. Barrel section is
approximately 24" in diameter and 30" in length.
It comes with 2 Tunnel Tiedowns (painted) and bolts and
wingnuts to attach it. Non-skid surface is painted in bottom
section for added traction. Barrel available in white or
blue. Tunnel tiedowns and non-skid surface available in
any painted color. Barrel does not need staking down to
stay in position. Removable foam protector comes with barrel
portion.
|

|
|
Barrel section sold separately
Approximate weight (with tiedowns) is 60 lbs.
|
BC - Barrel Cradle
$140
The Barrel cradle can be ordered separately and attached to your barrel
thereby saving high shipping costs when you provide the barrel.
Shaped to hold barrels and made from 1/2" steel, the cradle weighs about 35 lbs.
This eliminates the need for staking down either indoors or out, although holes are
located on each end of the bottom allow you to stake down if you prefer. Barrels
attach with bolts and wing nuts by drilling holes in the barrel that align with the
holes in the cradle arms. Available in any painted color.
Fabric Section
CH - Fabric Chute (choose 2 colors)
$175 (Fabric section ONLY)
Why buy an OVER! ROVER chute?
Each OVER! ROVER Chute is made from urethane or PVC coated nylon,
making it water and toenail resistant. All seams are quadruple
stitched and there are completely finished both inside (where the
dog comes in contact with it) and outside. Two large pockets with
velcro flaps (A) are stitched on the outside bottom of the chute
near the exit. These hold bags with aquarium gravel (included) to
keep the chute better positioned during use.
The chute is made from a TOP WEIGHT (lighter) and BOTTOM WEIGHT (heavier) fabric.
The heavier material used for the bottom part helps to prevent wear and tear
from toenails and friction from the running surface, as well as keeping the
tunnel in-line.
An easy to use RATCHET STRAP is threaded through the casing at the entrance
end of the chute and when attached properly is GUARANTEED TO KEEP THE CHUTE
ATTACHED TO THE BARREL!! The chute attaches and detaches with ease and can be
done by one person.
Drawstring STORAGE BAGS (B) are included with each chute ordered.
Chutes can be machine washed in cold water on gentle cycle and air dried.
Care should be taken to store the chute away from damp areas and out of sunlight
when not in use. UV rays and mildew are the #1 enemy of fabric over time!
Specify color choices & organization (AKC/USDAA/NADAC/UKC,etc) when ordering.
Top weight colors available = RED, BLUE, TEAL, HOT PINK
Bottom weight colors available = RED, BLUE, GREEN, YELLOW, PURPLE
|
A
B
|
| |
|
|
SSCH - STARS & STRIPES Fabric Chute
$250
Fabric Portion Only
This chute is available for immediate shipment.
What club wouldn't be proud to incorporate this patriotic chute during trials and demonstrations?
Eight 12" appliqued stars adorn the blue exit area of the chute. The striped portion
attaches to the barrel with a ratchet strap. All seams are quadruple stitched. Two pockets
on the blue bottom hold the weighted bags (included) that aid in keeping the chute in position during use.
Matching storage bag is included.
SSCH-X - STARS & STRIPES Deluxe Version
$300
Fabric Portion Only
The deluxe version of the Stars & Stripes Chute includes a "bonnet" for the barrel that
attaches with velcro straps underneath the barrel. 6" white stars are appliqued on the blue
fabric which covers the barrel. The three-stripe chute has a blue bottom and includes the same
pockets and ratchet strap as the standard chute design. Weights and matching storage bag are included.
|
|
|
|
| |
|
|