Set of 12 furniture grade PVC poles and aluminum base conform to the new AKC specifications as well as
other organizations. There are four sections of 3 poles each that can be configured for 3,6,9, or 12 poles.
Base is made of 3/8" by 2" aluminum flatbar with 3.5" pipes welded to the base.
1/4" x 2" flat bars make up the stabilizing bars.
Each set includes the base, stainless steel screws, and furniture grade PVC poles
that are striped in your choice of two colors.
Total weight of base and 12 poles is about 60 lbs.
Base can be ordered without the weave poles at a savings of $50 if you wish to provide your own poles.
Set of 12 channel weaves are made of 3/8" x 1" wide aluminum strips with 3.5" pole sockets
welded to the base. 1/4" x 2" flatbar with tapped holes allow you to set the channels from 16"
apart and in 2" increments for the next 5 steps, and then in 1" increments for the last four positions
until the channels are completely inline. This allows the dog to start off with the most speed and enthusiasm
running through the channel and gradually allows you to close the channels as the dog learns to bend its body,
while keeping up speed. With the addition of the optional EZ Weave Guides, the dog is encouraged to only make
correct entrances and exits from the weave poles.
Channel Weaves can be ordered in 3 sets of 4 poles which can be shipped by UPS, or in 2 sets of 6 which must be
shipped by over the road freight. Each set includes the base, stainless steel screws, and furniture grade PVC
poles that are striped in your choice of two colors.
Don't need the poles? The Channel Weaves can be ordered for $50 less if you want to use your own 3/4" poles.
Set of 10 flexible weave guides (to attach to 12
pole set) that clip on to any 3/4" weave poles.
No need to slip over poles - these guides easily clip
on at any height you prefer and will not rust, rot,
or leave marks on your poles. Guides create a natural
channel to begin training the weave poles and can be
used on both the Stick-In-Ground or Deluxe Weave Poles.
Set of 12 furniture grade 3/4" poles with a 6" bolt
to stick in the ground. A vinyl ground guide is included with
12 brass grommets spaced at 20". Perfect to start training
with or to take anywhere to train with different distractions.
And extra ground guide with 6 grommets spaced at 40" can
be ordered for channel weave pole training. Choose striping
from any 2 colors available.
SIG-1
12 Pole set w/ground guide
$85
SIG-2
12 Pole set w/2 ground guide
$95
Shown in channel formation
Weave Guides Sold Separately
Stick In The Ground Guide
The 1" vinyl ground guide is now available separately
with 12 brass grommeted holes with 20" spacing to make
using your own stick in the ground weave poles much easier.
A second ground guide with 6 holes at 40" spacing can
be ordered to train the channel method of weave poles.
GG-12
12 holes/20" spacing
$17
Used for stick in the ground weave poles
GG-6
6 holes/40" spacing
$14
Used for channel training
GG-CW
Buy both GG-12 and GG-6 together
$30
Do It Yourself Stick In The Ground Spikes
SIG/DIY
Set of 12 Stick In The Ground Weave Pole Spikes
$30
You provide the 3/4" PVC poles
SIG-1/DIY
Buy both SIG/DIY and GG-12 together
$46
You provide the 3/4" PVC poles
SIG-2/DIY
Buy both SIG/DIY and GG-CW together
$58
You provide the 3/4" PVC poles
WPSK
Weave Pole Striping Kit
$8
DIY striping for 12 poles Two 5" color bands per pole Choose any 2 available colors